Beijing ChipCity Technology Co., Ltd.
Main products:smart card,GPS synchronized clock,RFID
Products
Contact Us
  • Contact Person : Mr. Yang Kevin
  • Company Name : Beijing ChipCity Technology Co., Ltd.
  • Tel : 86-10-62410060-8006
  • Fax : 86-10-62410060-8004
  • Address : Beijing,Beijing,3-1313, Building 16, Chengnan Jiayuan Yichengyuan,City Avenue, Fengtai District
  • Country/Region : China
  • Zip : 100068

M24LR64-R: EEPROM with dual-interface I2C and RF

M24LR64-R: EEPROM with dual-interface I2C and RF
Product Detailed
M24LR64-R: a dual-interface I2C and RF, electrically erasable programmable memory (EEPROM).

M24LR64-R: a dual-interface I2C and RF, electrically erasable programmable memory (EEPROM). It features an I2C interface and can be operated from a VCC power supply. It is also a contactless memory powered by the received carrier electromagnetic wave. The M24LR64-R is organized as 8192 × 8 bits in the I2C mode and as 2048 × 32 bits in the ISO15693 and ISO 18000-3 mode 1 RF mode.

I2C uses a two-wire serial interface, comprising a bidirectional data line and a clock line. The devices carry a built-in 4-bit device type identifier code (1010) in accordance with the I2C bus definition.

The device behaves as a slave in the I2C protocol, with all memory operations synchronized by the serial clock. Read and Write operations are initiated by a Start condition, generated by the bus master. The Start condition is followed by a device select code and Read/Write bit (RW) (as described in Table 2), terminated by an acknowledge bit.

When writing data to the memory, the device inserts an acknowledge bit during the 9th bit time, following the bus master’s 8-bit transmission. When data is read by the bus master, the bus master acknowledges the receipt of the data byte in the same way. Data transfers are terminated by a Stop condition after an Ack for Write, and after a NoAck for Read.

In the ISO15693/ISO18000-3 mode 1 RF mode, the M24LR64-R is accessed via the 13.56 MHz carrier electromagnetic wave on which incoming data are demodulated from the received signal amplitude modulation (ASK: amplitude shift keying). The received ASK wave is 10% or 100% modulated with a data rate of 1.6 Kbit/s using the 1/256 pulse coding mode or a data rate of 26 Kbit/s using the 1/4 pulse coding mode.

Outgoing data are generated by the M24LR64-R load variation using Manchester coding with one or two subcarrier frequencies at 423 kHz and 484 kHz. Data are transferred from the M24LR64-R at 6.6 Kbit/s in low data rate mode and 26 Kbit/s high data rate mode. The M24LR64-R supports the 53 Kbit/s in high data rate mode in one subcarrier frequency at 423 kHz.

The M24LR64-R follows the ISO 15693 and ISO 18000-3 mode 1 recommendation for radio-frequency power and signal interface.

M24LR64-R: EEPROM with dual-interface I2C and RF



Copyright Notice @ 2008-2012 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.